进口PTFE铁氟龙美国苏威XPP527桶装粉状
PTFE铁氟龙 美国苏威XPP 527桶装 粉状Polymist® XPP 527
聚四氟 (PTFE)
Solvay Specialty Polymers
数据表
PDF(中文)
PDF(英语)
UL 黄卡
购买地点
产品说明:
Polymist® XPP 527是一种聚四氟 (PTFE)材料,。 该产品在北美洲、欧洲或亚太地区有供货,。
Polymist® XPP 527的典型应用领域为:添加剂/色母粒
总体
材料状态 已商用:当前有效
供货地区 北美洲
欧洲
亚太地区
用途 添加剂
外观 白色
形式 粉状
物理性能 额定值 单位制 测试方法
Bulk Density 500 g/l ASTM D4895
比表面积 3.0 m²/g 内部方法
颗粒大小 - D50 30.0 µm 内部方法
补充信息 额定值 单位制 测试方法
Melt Temperature 315 到 325 °C ASTM D3418
Processing
Polymist® XPP 527 is used as 添加剂s in paints and coatings where improvements in non-stick, mar resistance, slip, chemical resistance, and moisture repelling characteristics are desired.
Polymist® XPP 527 may be used independently as an 添加剂 or in combination with polyethylene waxes. The PTFE content at the surface layer is required in order to impart the properties of PTFE to the coating.
Polymist® XPP 527 is also highly recommended as 添加剂s in ink formulations because it can offer a wide range of performance attributes.
Storage and Handling
The usual precautions for safe storage and handling of Polymist® XPP 527 should be taken according to material safety documentation and experience. There will be no chemical deterioration of the Polymist® XPP 527 during proper storage.
Shelf life of Polymist® XPP 527 micronized powders will vary depending upon whether the recommended storage conditions are maintained and whether the material remains free from foreign contamination during storage time (not exposed to dirt, dust, water or other chemicals). The material should remain sealed in the original containers and storage conditions should provide for protection from temperature extremes as well as rain, snow or other wet environments (or such conditions which may damage the storage containers in which the product is stored).
Safety and Toxicology
Before using PTFE Polymist® XPP 527 micronized powders consult the product Material Safety Data Sheet and follow all label directions and handling precautions.
As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapor extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods.
Packaging
Polymist® XPP 527 is packaged in 25 kg non returnable drums. Each drum has one bag liner made of polyethylene resin.
联系我时,请说是在黄页88网潜江工程塑料栏目上看到的,谢谢!